Spring Type:
for vehicles with rear axle air suspension
Suspension:
for vehicles with electronic suspension control
Fitting Position:
Right Rear
Packaging length [cm]:
67.0
Packaging width [cm]:
19.5
Packaging height [cm]:
22.0
Shock Absorber Mounting Type:
Top yoke
Shock Absorber Mounting Type:
Bottom eye
Reference model:
Rear For BMW 6 SERIES G32 4Matic 2017-2023
620d 620dX 630d 630dX 630i 630i B48 630i B48D
630iX 640dX 640i B58 640i B58C 640iX B58 640iX B58C
BMW 6 2018/07-2020/06 G32 620d 1995 ccm, 140 KW, 190 PS
BMW 6 2018/07-2020/06 G32 620d 1995 ccm, 120 KW, 163 PS
BMW 6 2018/07-2020/06 G32 620d xDrive 1995 ccm, 120 KW, 163 PS
BMW 6 2018/07-2020/06 G32 620d xDrive 1995 ccm, 140 KW, 190 PS
BMW 6 2017/06-2020/06 G32 630d 2993 ccm, 155 KW, 211 PS
BMW 6 2017/06-2020/06 G32 630d 2993 ccm, 195 KW, 265 PS
BMW 6 2017/06-2020/06 G32 630d xDrive 2993 ccm, 155 KW, 211 PS
BMW 6 2017/06-2020/06 G32 630d xDrive 2993 ccm, 195 KW, 265 PS
BMW 6 2017/06-2020/06 G32 630d xDrive 2993 ccm, 183 KW, 249 PS
BMW 6 2017/06-2020/06 G32 630i 1998 ccm, 183 KW, 249 PS
BMW 6 2017/07-2020/06 G32 630i 1998 ccm, 190 KW, 258 PS
BMW 6 2019/07-2023/12 G32 630i xDrive 2998 ccm, 190 KW, 258 PS
BMW 6 2017/11-2020/06 G32 640d xDrive 2993 ccm, 235 KW, 320 PS
BMW 6 2017/06-2020/06 G32 640i 2998 ccm, 265 KW, 360 PS
BMW 6 2017/06-2020/06 G32 640i 2998 ccm, 250 KW, 340 PS
BMW 6 2017/06-2020/06 G32 640i xDrive 2998 ccm, 250 KW, 340 PS
BMW 6 2017/06-2020/06 G32 640i xDrive 2998 ccm, 265 KW, 360 PS
Tips
How to distinguish the advantages and disadvantages of shock absorbers
Shock absorbers are vulnerable components in the use of automobiles. The performance of shock absorbers directly affects the smoothness of vehicle operation and the lifespan of other components. Therefore, shock absorbers should be kept in good working condition regularly. The following methods can be used to verify the proper functioning of shock absorbers:
1. After driving the car on a road with poor conditions for 10 kilometers, stop and touch the shock absorber shell with your hand. If it is not hot enough, it means that there is no resistance inside the shock absorber and it is not working.
2. Press down firmly on the bumper and then release it. If the car jumps 2-3 times, it indicates that the shock absorber is working properly.
3.When the car is driving slowly and emergency braking occurs, if the car vibrates violently, it indicates that there is a problem with the shock absorber.
4. Remove the shock absorber and stand it upright, clamp the lower connecting ring onto the vise, and apply force to pull and press the shock absorber rod several times. At this point, there should be stable resistance, and the resistance to pulling it up and restoring it should be greater than the resistance to pressing it down. If the resistance is unstable or there is no resistance, it may be due to a lack of oil inside the shock absorber or damaged valve parts, which should be repaired or replaced.
